The latch-valve assembly shall be Ohmeda compatible and accept only corresponding Ohmeda type gas specific adapters. All M.R.I. outlets are manufactured from nonferrous materials. All outlets shall be cleaned and degreased for...

The Extended Latch-Valve Assembly shall accommodate a 3/4" to 1-1/4" wall thickness.A large color-coded front plate shall be used for ease of gas identification and aesthetic appeal.Extended Latch-Valve Assemblies are available...

General Features Flow rate exceeds the requirements of NFPA and CSA Accepts only Ohmeda Diamond? gas specific adaptors 100% Pressure testing of each outlet and cleaned for medical gas service Indexed to eliminate interchange...

The Ohmeda Locking device shall be an Amico Alert-1 Series. The locking device shall limit any tampering with the internal primary check assembly ofthe latch-valve. Ohmeda Locking Device: Each device will plug into place witho...

Outlets manufactured by Amico Corporation are ALL cleaned for Oxygen service. DO NOT USE OIL when operating or cleaning the outlets. Outlets must be checked for wear, damage and proper function once a year. Outlets subject to h...

Features: Single-outlet surface mounting box Accepts any Amico console outlet Baked painted steel (18 gauge) bracket is screwed to the wall holding outlet rough-in in place for piping gas supply line White ABS fire retardant ...

The latch-valve assembly shall be Oxequip compatible and accept only corresponding Oxequip type gas specific adapters. All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested.

The medical gas outlet shall be an Amico Alert-1 series. The Passive Outlet shall be manufactured with a 7-1/4" [184 mm] length type K 7/8" [22 mm] outside diameter, 3/4" nominal size copper inlet pipe stub, which is silver br...

Pressure Switch for Nitrogen or other 11- 250 psi inert gas services. Pressure switches for the medical gas alarm system shall incorporate a U.L. Listed single pole double throw snap-action switching element. Electrical connec...

Pressure and vacuum switches for the medical gas alarm system shall incorporate a U.L. Listed single pole double throw snap-action micro switch. The pressure switch shall be prewired with six color coded leads (3 leads for vacu...

Pressure switches for the medical gas alarm system shall incorporate a U.L. Listed single pole double throw snap-action micro switch. The pressure switch shall be prewired with six color coded leads (3 leads for vacuum). Normal...

The Reserve Manifold Pressure Switch is used for monitoring the supply pressure in the reserve system. The switch is preset @ 1,100 psi [7,585 kPa] decreasing pressure, to alarm before the reserve header contents fall to one da...