General Features: Accurate cracking pressure Temperature range: -100F to +165F, -73C to +74C Pressure settings: 75, 110, 125, 150, 200, 225, 250, 375, or 450 psi Orifice size: 1"-1.25" diameter Flow co-efficient (cv factor): 1...

General Features: Provides the user with the ability to receive an audible and visual alarm from a remote dry contact signal. A device sending a dry contact signal. An Amico Alert-2 area or master alarm. An Alert-2 manifold ba...

General Features Size: 2" Accuracy: +/- 1.5% of full scale. ASME B40.1 Grade B Range:ÿ 0 - 30" Vac Temperature: Ambient: -13F to 140F Media: Max. 140F Connection: 1/8" Male NPT Center Back Bourdon Tube: Copper alloy Movement: ...

All gas valve tags comply with NFPA 99. All tags shall be CGA color-coded and gas-specific. The tags shall also be durable and heat-resistant with a brass grommet.

Color-coded, gas specific hose assemblies are available in custom lengths. The Hose Assemblies are manufactured with FDA approved medical grade themoplastic conductive rubber tubing. The tubing is reinforced with polyester yar...

General Features Size: 2" Accuracy: +/- 1.5% of full scale. ASME B40.1 Grade B Range: 0 - 300 psi (0-2000 kPa) Temperature: Ambient: -13F to 140F Media: Max. 140F Connection: 1/8" Male NPT Center Back Bourdon Tube: Copper allo...

General Features Size: 2" Accuracy: +/- 1.5% of full scale. ASME B40.1 Grade B Range: 0 - 100 psi (0 -700 kPa) Temperature: Ambient: -13F to 140F Media: Max. 140F Connection: 1/8" Male NPT Center Back Bourdon Tube: Copper alloy...

The Amico outlet test plugs shall be used to connect the Nitrogen purge gas to a medical gas rough-in outlet during the installation process. The test plugs shall also be used to expel the purge gas. All test plugs shall be of...

The DISS Dust Cap is made from machined aluminum and black anodized for aesthetic appearance designed to eliminate dust and dirt build-up on the DISS connections while not in use.

Amico riser pipe assemblies are gas specific DISS fittings to the CGA V-5 standard and are available in most gas and suction configurations. Mishandling of installation is prevented by a one piece body design. Amico uses the i...

The Amico hose retractor can be attached directly to a ceiling outlet or directly to the ceiling. The retractor wire is manufactured out of 48" stainless steel heavy duty cable (not MRI compatible).

Accurate cracking pressure Temperature range: -100F to +165F -73C to +74C Pressure settings: 75, 150, 200, 225, 250, 350, 375 and 450 psi Orifice size: 5/16" dia Flow co-efficient (cv factor): 1.3 type Seat material: Viton ...