The Amico outlet continues to provide worry free and dependable service. Aesthetically pleasing in any patient room, this Ohmeda connection Amico gas outlet provides a full color fascia for easy gas identification during those ?critical? moments. Amico?s outlets exceed flow rate requirements set by NFPA/CSA. All outlets are 100% cleaned and tested in order to ensure quality and are backed by our industry leading 5 year Warranty. We also have other configurations available to match your requirements.
The medical gas outlet shall be an Amico Alert-1 series.
Outlets shall be manufactured with a 7-3/4" (197 mm) length type ?K? 1/2" (12.7 mm) outside diameter (3/8" [9.5 mm] nominal) size copper inlet pipe stub which is silver brazed to the outlet body. The body shall be of 1-5/16" (33 mm) diameter, one piece brass construction.
For positive pressure gas services, the outlet shall be equipped with a primary and secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi (1,379 kPa) in the event the primary check valve is removed for maintenance. Outlet bodies shall be gas specific by indexing each gas service to a gas specific dual pin indexing arrangement on the respective identification module.
A large color coded front plate shall be used for ease of gas identification and aesthetic appeal.
The latch-valve assembly shall accommodate up to 3/4" (19 mm)
wall thickness.
All M.R.I. outlets are manufactured from nonferrous materials.
All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested.
Amico products comply with NFPA 99.
The Amico outlet continues to provide worry free and dependable service. Aesthetically pleasing in any patient room, this Ohmeda connection Amico gas outlet provides a full color fascia for easy gas identification during those ?critical? moments. Amico?s outlets exceed flow rate requirements set by NFPA/CSA. All outlets are 100% cleaned and tested in order to ensure quality and are backed by our industry leading 5 year Warranty. We also have other configurations available to match your requirements.
The medical gas outlet shall be an Amico Alert-1 series.
Outlets shall be manufactured with a 7-3/4" (197 mm) length type ?K? 1/2" (12.7 mm) outside diameter (3/8" [9.5 mm] nominal) size copper inlet pipe stub which is silver brazed to the outlet body. The body shall be of 1-5/16" (33 mm) diameter, one piece brass construction.
For positive pressure gas services, the outlet shall be equipped with a primary and secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi (1,379 kPa) in the event the primary check valve is removed for maintenance. Outlet bodies shall be gas specific by indexing each gas service to a gas specific dual pin indexing arrangement on the respective identification module.
A large color coded front plate shall be used for ease of gas identification and aesthetic appeal.
The latch-valve assembly shall accommodate up to 3/4" (19 mm)
wall thickness.
All M.R.I. outlets are manufactured from nonferrous materials.
All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested.
Amico products comply with NFPA 99.
RECENTLY VIEWED PRODUCTS