Pressure Switch for Nitrogen or other 11- 250 psi inert gas services.
Pressure switches for the medical gas alarm system shall incorporate a U.L. Listed single pole double throw snap-action switching element. Electrical connections are made through a 1/2"onduit connection to screw terminals on the switch. The switch may be
wired normally open or normally closed. Electrical rating shall be
10 amperes at 120 volt AC.
The pressure switch has a proof pressure of 1000 psi with an adjustable range of 10 to 230 psi decreasing pressure or 11 to 250 psi increasing pressure. Provide one switch for high pressure alarm signal and one switch for low pressure alarm signal.
The enclosure shall be a Nema 4 water tight housing with a 1/4" NPT gas service line connection on bottom and a 1/2" NPT conduit hub on top.
The Pressure Switch is UL Listed and CSA Approved.
Pressure Switch for Nitrogen or other 11- 250 psi inert gas services.
Pressure switches for the medical gas alarm system shall incorporate a U.L. Listed single pole double throw snap-action switching element. Electrical connections are made through a 1/2"onduit connection to screw terminals on the switch. The switch may be
wired normally open or normally closed. Electrical rating shall be
10 amperes at 120 volt AC.
The pressure switch has a proof pressure of 1000 psi with an adjustable range of 10 to 230 psi decreasing pressure or 11 to 250 psi increasing pressure. Provide one switch for high pressure alarm signal and one switch for low pressure alarm signal.
The enclosure shall be a Nema 4 water tight housing with a 1/4" NPT gas service line connection on bottom and a 1/2" NPT conduit hub on top.
The Pressure Switch is UL Listed and CSA Approved.
RECENTLY VIEWED PRODUCTS