The Amico wall gauge continues to provide worry free and dependable service. Aesthetically pleasing in any patient room, this Amico wall gauge provides a full color fascia for easy gas identification. All gauge assemblies are 100% cleaned and tested in order to ensure quality and are backed by our industry leading 5 year Warranty.
General Features:
- 100% Pressure testing of each outlet and cleaned for medical gas service
- Indexed to eliminate interchangeability of gas services
- Up to 1" (25mm) wall thickness adjustment
- 360 Swivel Inlet Pipe for easy installation
Gauge Wall Assembly shall be manufactured with a 7-3/4" [197mm] length type "K" 1/2" [12.7 mm] outside diameter (3/8" nominal) size copper inlet pipe stub, which is silver brazed to the outlet body. The body shall be of 1-5/16" [33 mm] diameter, one
piece brass construction. Gauge wall assembly with a secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi [1,379 kPa] in the event the gauge assembly is removed for maintenance. Outlet bodies shall be gas specific by indexing each gas service to a gas specific dual pin indexing arrangement on the respective identification module.
A large, color coded front plate shall be used for ease of gas identification and aesthetic appeal.
A one piece chromed fascia plate shall frame the outlet. With the back rough-in mounted the outlet shall adjust from 3/8" [10 mm] to 1" [25 mm] variation in wall thickness.
The gauge wall assemblies shall include a specific 1.6 mm [16 ga.] steel mounting plate designed to permit on-site ganging multiple outlets, in any order, on 5" [127 mm] spacing.
The Amico wall gauge continues to provide worry free and dependable service. Aesthetically pleasing in any patient room, this Amico wall gauge provides a full color fascia for easy gas identification. All gauge assemblies are 100% cleaned and tested in order to ensure quality and are backed by our industry leading 5 year Warranty.
General Features:
- 100% Pressure testing of each outlet and cleaned for medical gas service
- Indexed to eliminate interchangeability of gas services
- Up to 1" (25mm) wall thickness adjustment
- 360 Swivel Inlet Pipe for easy installation
Gauge Wall Assembly shall be manufactured with a 7-3/4" [197mm] length type "K" 1/2" [12.7 mm] outside diameter (3/8" nominal) size copper inlet pipe stub, which is silver brazed to the outlet body. The body shall be of 1-5/16" [33 mm] diameter, one
piece brass construction. Gauge wall assembly with a secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi [1,379 kPa] in the event the gauge assembly is removed for maintenance. Outlet bodies shall be gas specific by indexing each gas service to a gas specific dual pin indexing arrangement on the respective identification module.
A large, color coded front plate shall be used for ease of gas identification and aesthetic appeal.
A one piece chromed fascia plate shall frame the outlet. With the back rough-in mounted the outlet shall adjust from 3/8" [10 mm] to 1" [25 mm] variation in wall thickness.
The gauge wall assemblies shall include a specific 1.6 mm [16 ga.] steel mounting plate designed to permit on-site ganging multiple outlets, in any order, on 5" [127 mm] spacing.
RECENTLY VIEWED PRODUCTS