Vacuum Gauge Assembly for the medical gas alarm system incorporates a single pole double-throw snap-action micro switch. It is prewired with three color coded leads. Normally open/closed circuitry is field-selected to be compatible with the medical gas alarm system design. Electrical rating shall be 10 amperes at 120 volt AC.
The vacuum switch shall be tested up to 30" Hg with an adjustable range of .8" to 29" Hg, preset at 12" Hg for the alarm condition.
The switch enclosure shall be a Nema 4 water tight housing with mounting bracket, 1/4? FNPT bottom inlet gas service line connection, and 3/4" FNPT top inlet conduit.
A gauge shall be incorporated after the pressure switch. A gas specific DISS nut and nipple shall be attached to the bottom of the gauge.
The Vacuum Gauge Assembly will then be mounted directly to a gas specific DISS demand check (provided by Amico) directly onto the pipeline. The demand check shall have a 1/4" Male NPT connection.
Vacuum Gauge Assembly for the medical gas alarm system incorporates a single pole double-throw snap-action micro switch. It is prewired with three color coded leads. Normally open/closed circuitry is field-selected to be compatible with the medical gas alarm system design. Electrical rating shall be 10 amperes at 120 volt AC.
The vacuum switch shall be tested up to 30" Hg with an adjustable range of .8" to 29" Hg, preset at 12" Hg for the alarm condition.
The switch enclosure shall be a Nema 4 water tight housing with mounting bracket, 1/4? FNPT bottom inlet gas service line connection, and 3/4" FNPT top inlet conduit.
A gauge shall be incorporated after the pressure switch. A gas specific DISS nut and nipple shall be attached to the bottom of the gauge.
The Vacuum Gauge Assembly will then be mounted directly to a gas specific DISS demand check (provided by Amico) directly onto the pipeline. The demand check shall have a 1/4" Male NPT connection.
RECENTLY VIEWED PRODUCTS